paxgot.blogg.se - California cdl air brake test

Start the engine and then slowly release the clutch.

If any of the components mentioned above are not belt driven, you must make sure that the component(s) are operating properly, are not damaged or leaking and are mounted securely.

Confirm that there is an adequate power steering fluid level that is above the refill mark.Ĭheck these belts for cracks, frays and snugness (at most 3/4 inch play at center of belt):.

Indicate the location of the power steering fluid dipstick.

b) Removing the radiator cap if the engine is not hot and visually checking the coolant level.

a) Checking the reservoir sight glass, or.

Make sure the oil level is within safe operating range and above the refill mark.

Inspect hoses for "good" condition and leaks.

Look for dripping fluids on the underside of the engine and transmission.Look for puddles on the ground that would indicate a leak.This varies from state to state.Ĭheck your specific California CDL Information for details. Depending on where you live, you will either have to provide a proper

They are given either by a state tester or by a state approved third party The three-part skills tests must be scheduled (often more than a week ahead). Memory aid allowed and it cannot be altered or include notes or additions. License Manual during the Vehicle Inspection test segment. In many states, a driver may use the Memory Aid found in the Commercial Driver's The California Vehicle Checklist Inspection (walk-around) test is explainedĬalifornia CDL Handbook (Commercial Driver's License Manual).

A driver is not required toĬrawl under the vehicle during the test. Under the hood engine compartment inspection. The California vehicle inspection test (walk-around) requires the driver to point out vehicle componentsĪnd explain what you are checking and why to the examiner. Vehicle Pre-Trip Checklist Inspection - California CDL Skills Tests: